Wood science is the study of wood as a material that is renewable and of biological origin. The processes and the tools used to utilize the material is what is known as wood technology. Other products are put alongside wood for easy testing and study. Materials properties, ease of it being worked on and its value are among the few properties which are compared against those of wood and other materials. The many Merits of timber and these technologies improve wood to be superior over other products. Wood can be applied in very many applications, and this gives it an upper hand over other materials. Once a tree has been cut down another can be planted in the same spot. All the parts of wood can be put into use, and this makes it a better fit than other materials which most of their byproducts are a waste.
The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. This protection is from moisture and insects which are the biggest threat to wood. The moisture courses the timber to decay and the insects eat through the wood. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. This is a copper-based preservative that is applied to the wood for protection. Although being a good method to use for wood protection it has presents some few challenges. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.
Many methods are being invented to protect the wood, and one of them is the copper metal method. The use of this method is fast being accepted because it is not corroding the metal fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. This process is highly effective and the wood properties and heightened. The timber treated in this way is used in both outdoor and indoor frames that last very long.
The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. It has also shown to be an improvement in corrosion resistant properties to metal fasteners. Extensive research over a period of 10 years has proven the effectiveness of this science as one of the best wood preservation methods.